Introducing our 30 mm Pathlength Glass Cuvettes with 2 Windows. Our cuvettes are made of high-quality optical glass material, along with a round bottom design to ensure reliability and accuracy. With their 30mm path length, they’re great for transmission and absorbance measurements, as well as other experiments that require precise results.
Our passion lies in delivering the best equipment and tools; trust us to provide you with quality service at an affordable price. Invest in our 30mm Pathlength Glass Cuvettes today – get only optimum outcomes for your scientific experiments!
0 | 1 | 2 | 3 | ||
---|---|---|---|---|---|
*Molded | *Fused | *Bonded / Glued | |||
UV vis ( 350- 2000 nm) | Yes | Yes | Yes | ||
Transmission Matched | Yes | Yes | Yes | ||
Transmission > 80% | Yes | Yes | Yes | ||
Resistant to Acids and Bases (except hydrofluoric acid) | Yes | Yes | No | ||
Resistant to Organic Solvents | Yes | Yes | No | ||
0 Variations Reading | On Request | No | No | ||
Fabrication | Molded | Assembled with Glass Powder | Assembled with Glue | ||
Adhesives | No | No | Yes | ||
Storage | Short Term Storage | Clean After Use | Clean After Use | ||
Available Material | Optical Glass Material | ||||
Note | Molded and fused cuvettes and cells are assembled by direct fusion without the use of adhesives throughout the production process. This guarantees resistance against corrosive chemicals and high temperature. Each glass cuvette and cell has excellent transmission from 350 nm to 2000 nm. |
To the best of our knowledge, the information provided here is accurate. However, Aireka Scientific assumes no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food, or commercial applications.
There are no reviews yet.