40 mm IR Quartz Cuvette, 14 mL, 2 Windows, QGI40
The two Windows IR Cuvettes come with an impressive 40 mm pathlength, ensuring maximum accuracy for your lab’s analysis needs. They offer a reliable and precise measurement for the spectrum range of 260 – 3,500 nm, making them ideal for a broad range of applications. Made from high-quality materials, these cuvettes are sure to provide accurate results time and time again, making them a great investment for any lab looking to improve their analysis capabilities.
$53.00 – $93.00
If you’re searching for a cuvette that can withstand intensive spectroscopy research while providing accurate readings over the 260 – 3,500 nm spectral range, then the QGI40-02 IR Quartz Cuvette is exactly what you need.
It’s built from high-grade IR quartz and has dimensions of 45 x 12.5 x 42.5 mm with a 40 mm path length and 14,000 μL capacity. Its extremely tough construction resists most chemical solutions, and the two polished windows provide exceptional accuracy at both short and long wavelengths. Moreover, these windows are shielded inside a fused unit to ensure good condition even in the toughest of circumstances.
Make your spectroscopy research more efficient with the QGI40-02 from Aireka Scientific. With reliable performance and sturdy construction, you can rest assured that your data will be valid every time. Don’t hesitate any longer – take your research to the next level with this 4mm cuvette. Every detail has been optimized to ensure convenience and accuracy in applications.
IR quartz cuvettes are essential components in modern laboratory analysis and research, allowing for precise spectral measurements in infrared light. These cuvettes are made of high-quality polished quartz, which is highly transparent in the near-infrared (NIR) region of the electromagnetic spectrum. The IR quartz cuvettes offer high accuracy, reliability, and durability, which are crucial for chemical and biological analysis applications.
Here are some of the key features of IR quartz cuvettes that make them stand out from other types of cuvettes:
- Transparency – IR quartz cuvettes exhibit high transparency in the near-infrared region, with minimal absorption or scattering of the light. This feature ensures that the cuvette does not interfere with the spectral measurements and provides accurate and reliable results.
- Chemical Resistance – The IR quartz cuvettes are highly resistant to chemical attack from harsh substances, such as acids, alkalis, and organic solvents. This allows for a wide range of chemical and biological analyses to be conducted using the same cuvette, without the worry of chemical degradation.
- Design Flexibility – IR quartz cuvettes come in a range of designs and sizes, enabling the user to select the most suitable cuvette for their particular application. For example, the cuvette designs may include flow-through cuvettes, semi-micro cuvettes, and macro cuvettes, among others.
- High Temperature Tolerance – The IR quartz cuvettes exhibit high temperature tolerance, making them suitable for use in high-temperature reactions and analyses. This feature ensures that the cuvettes can withstand harsh conditions, ensuring that the spectral measurements remain accurate and precise.
- Easy to Clean – The IR quartz cuvettes are easy to clean and maintain, which is essential for maintaining consistent spectral measurements. This feature also ensures the cuvette is durable and can withstand frequent cleaning without being damaged.
- Compatibility – IR quartz cuvettes are compatible with a wide range of spectrophotometers from different manufacturers, making them a versatile option for labs with multiple instruments.
In summary, IR quartz cuvettes are essential laboratory equipment that offers high accuracy, reliability, and durability, allowing for precise spectral measurements in infrared light. They are highly transparent, chemically resistant, and exhibit high-temperature tolerance, making them an ideal choice for a wide range of chemical and biological analysis applications. The design flexibility and compatibility of IR quartz cuvettes also ensure that they can be used in a variety of spectrophotometers, making them a versatile option for labs with multiple instruments.
| 0 | 1 | 2 | 3 | ||
|---|---|---|---|---|---|
| *Molded | *Fused | *Bonded / Glued | |||
| UV vis ( 190- 2500 nm) | Yes | Yes | Yes | ||
| Transmission Matched | Yes | Yes | Yes | ||
| Transmission > 80% | Yes | Yes | Yes | ||
| Resistant to Acids and Bases (except hydrofluoric acid) | Yes | Yes | No | ||
| Resistant to Organic Solvents | Yes | Yes | No | ||
| Usable upto 500°C (932°F) | Yes | Yes | No | ||
| Usable upto 1200°C (2192°F) | Yes | No | No | ||
| 0 Variations Reading | On Request | No | No | ||
| Fabrication | Molded | Assembled with Quartz Powder | Assembled with Glue | ||
| Adhesives | No | No | Yes | ||
| Storage | Short Term Storage | Clean After Use | Clean After Use | ||
| Available Material | ES Quartz Material | ||||
| Note | Molded and fused cuvettes and cells are assembled by direct fusion without the use of adhesives throughout the production process. This guarantees resistance against corrosive chemicals and high temperature. Each quartz cuvette and cell has excellent transmission from 190nm to 2500nm. | ||||
To the best of our knowledge, the information provided here is accurate. However, Aireka Scientific assumes no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food, or commercial applications.
| Weight | 100 g |
|---|---|
| Options | 40mm-IR-Bonded, 40mm-IR-Fused |
| QGI40-01 | 40mm-IR-Bonded | 40 mm, Lid Included IR Cuvette, Bonded / Glued, for Aqueous Samples Only. H x W x D: 45 x 12.5 x 42.5 mm, Pathlength: 40 mm, 2 Polished Windows, Material: IR Quartz, 260 – 3,500 nm Spectral Range, Chamber Volume 14,000 μL |
| QGI40-02 | 40mm-IR-Fused | 40 mm, Lid Included IR Cuvette, Fused, Resistant to Most Chemicals. H x W x D: 45 x 12.5 x 42.5 mm, Pathlength: 40 mm, 2 Polished Windows, Material: IR Quartz, 260 – 3,500 nm Spectral Range, Chamber Volume 14,000 μL |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Cuvettes, Long Path Length Cuvettes, Micro Cuvettes, Standard Volume Cells
40 mm Quartz Absorption Cuvettes with 2 Clear Windows, 14mL, QGB40
Cuvettes, Long Path Length Cuvettes, Micro Cuvettes, Standard Volume Cells40 mm Quartz Absorption Cuvettes with 2 Clear Windows, 14mL, QGB40
Introducing our 2 Windows Absorption Cuvettes! Featuring a 40 mm pathlength and a spectral range of 200-2,500 nm, these cuvettes are made of high-quality quartz and have a volume of 14ml. Expand the testing capabilities of your lab with these reliable and durable cuvettes. Order yours today!
SKU: QGB40 -
Cuvettes, Macro Cuvettes, Micro Cuvettes, Standard Volume Cells
10 mm Quartz Absorption Cuvette, 3.5mL, QGB10
Cuvettes, Macro Cuvettes, Micro Cuvettes, Standard Volume Cells10 mm Quartz Absorption Cuvette, 3.5mL, QGB10
Our cuvette products come with a variety of options to meet your needs. You can choose from two windows, and pathlengths ranging from 1 – 100 mm. We offer a range of closures as well, including lids, stoppers, and screw cap threads. Let us help you find the best cuvette for your needs.
SKU: QGB10 -
Cuvettes, Micro Cuvettes, Short Path-Length Cells, Standard Volume Cells
2 mm Quartz Fluorometric Cuvettes with 4 Clear Windows, 0.7 mL, QG402
Cuvettes, Micro Cuvettes, Short Path-Length Cells, Standard Volume Cells2 mm Quartz Fluorometric Cuvettes with 4 Clear Windows, 0.7 mL, QG402
These transparent 4-windows fluorescence cuvettes come in two different pathlengths of 2 mm or 10 mm, are made of high-quality quartz and come with an open top lid. They are ideal for fluorescence measurements in a lab setting.
SKU: QG402 -
Cuvettes, Micro Cuvettes, Short Path-Length Cells, Standard Volume Cells
3 mm Quartz Absorption Cuvettes with 2 Clear Windows, 1.05mL, QGB03
Cuvettes, Micro Cuvettes, Short Path-Length Cells, Standard Volume Cells3 mm Quartz Absorption Cuvettes with 2 Clear Windows, 1.05mL, QGB03
Consider using the 2 Windows Absorption Cuvettes as a means for measuring and comparing the absorbance of a liquid sample. Constructed from quartz, it can be utilized with a spectral range of 200 – 2,500 nm and features a 3 mm Pathlength, making it optimal for various lab experiments.
SKU: QGB03
There are no reviews yet.