If you’re looking for a top-of-the-line quartz cuvette that can be used for aqueous samples, the QGM213 2 – 13 uL Black Wall Sub-Micro Cuvette is just what you need. Crafted from the highest quality quartz materials, our cuvette offers a 200 – 2,500 nm spectral range and comes with three polished windows and an included lid. The sleek design of this product gives it an air of professionalism while its 45 x 12.5 x 12.5 mm measurements maximize efficiency in the laboratory.
With a volume capacity of 2–13 μl and a detection method of fluorometric, you’ll enjoy convenience and accuracy when measuring with this product. Perfect for both beginners and more experienced researchers, this black wall sub-micro cuvette is sure to give you high-performance levels time after time.
Z dimension of Sub-Micro Cuvettes is available 8.5 / 15 / 20 mm for customization on request. Please email us: sales@airekasci.com.
0 | 1 | 2 | 3 | ||
---|---|---|---|---|---|
*Molded | *Fused | *Bonded / Glued | |||
UV vis ( 190- 2500 nm) | Yes | Yes | Yes | ||
Transmission Matched | Yes | Yes | Yes | ||
Transmission > 80% | Yes | Yes | Yes | ||
Resistant to Acids and Bases (except hydrofluoric acid) | Yes | Yes | No | ||
Resistant to Organic Solvents | Yes | Yes | No | ||
Usable upto 500°C (932°F) | Yes | Yes | No | ||
Usable upto 1200°C (2192°F) | Yes | No | No | ||
0 Variations Reading | On Request | No | No | ||
Fabrication | Molded | Assembled with Quartz Powder | Assembled with Glue | ||
Adhesives | No | No | Yes | ||
Storage | Short Term Storage | Clean After Use | Clean After Use | ||
Available Material | ES Quartz Material | ||||
Note | Molded and fused cuvettes and cells are assembled by direct fusion without the use of adhesives throughout the production process. This guarantees resistance against corrosive chemicals and high temperature. Each quartz cuvette and cell has excellent transmission from 190nm to 2500nm. |
To the best of our knowledge, the information provided here is accurate. However, Aireka Scientific assumes no liability for the accuracy of this page. The values provided are typical at the time of manufacture and may vary over time and from batch to batch. All products are for laboratory and research and development use only, and may not be used for any other purpose including health care, pharmaceuticals, cosmetics, food, or commercial applications.
There are no reviews yet.